Home Categories Send inquiry

FLTXNY 200w 24v 12v Helix Vertical Wind Turbine Generator FS-200

Features

1, Rich colors. The blades could be white, orange, yellow, blue, green, mixed, and any other color.2, Various voltages. 3 phase AC output, suitable for charging 12V, 24V, 48V batteries.
3, One-piece Blade design ensures higher rotational stability, low noise.
4, Coreless generator means lower start torque, lower start wind speed, longer service life.
5, RPM limit protection. The RPM is kept under 300 regardless of high wind speed which prevents –the controller from over-load.
6, Easy installation. Full set of fasteners and installation tools are attached in the package.
7, Long service life. The turbine could work 10~15 years under normal natural environments

Specifications

item FS-200        
Started wind speed 1.3 m/s        
Cut-in wind speed  2.5 m/s        
Rated Wind speed  11 m/s        
Rated voltage (AC) 12/24V        
Rated power(W) 200W        
Max power(W) 210W        
Wheel diameter(m) 0.52        
weight <21Kg        
Blades height(m) 1.05m        
Safe wind speed  ≤40m/s
Blades quantity 2
Blade material glass/basalt
Generator Three phase permanent magnet suspension motor
Control System Electromagnet
Generator protection grade IP54
Work environment temperature -25~+45ºC,
Altitude: ≤4500m
Overspeed protection Electromagnetic brake
Overload protection Electromagnetic brake and the unloading unit

Product Description

1.low start up speed; high wind energy utilization; beautiful appearance; low vibration

2.Human friendly design, easy installation, maintenance and repair.

3.precise injection molding blades together with the optimized design of aerodynamic contour and structure, the blades have such advantages: high utilization of wind energy which contributes to the annual energy output.

4.the generators, adopting patented permanent magnet rotor alternator,with a special kind of stator design, efficiently decrease resistance torque.Meanwhile, it makes the wind turbines match the generators quite well and increase its reliability

Tower and Accessories Production

1.its flange base is suggested to be installed on a iron barrel-type tower whose OD is 48mm and thickness is 4.5mm.

2,Iron pipe length is suggested to choose based on local wind scales and geographical environment.

3, tower accessories, including (1)the upper tower. (2) The cable group. (3) Tightening line device. (4) Anchor. (5) Line hook. (6) tower base. (7) Anti-tarnish, anticorrosive, coating materials.

4. The making and size of the upper tower is shown in figure 2. Its requirement: solid welding; no leak at the weld zone; the earth lug must be welded 20cm away from the ground(clearly visible). It will be connected to the lightening grounding device.

5. Please refer to the national standard, or the European standard, or American standard or  figure 1 in this manual to arrange grounding device.
6. Tower and its accessories can be provided individually according to your requirements

The Wind Turbine Installation Steps

1.its flange base is suggested to be installed on a iron barrel-type tower whose OD is 48mm and thickness is 4.5mm.

2,Iron pipe length is suggested to choose based on local wind scales and geographical environment.

3, tower accessories, including (1)the upper tower. (2) The cable group. (3) Tightening line device. (4) Anchor. (5) Line hook. (6) tower base. (7) Anti-tarnish, anticorrosive, coating materials.

4. The making and size of the upper tower is shown in figure 2. Its requirement: solid welding; no leak at the weld zone; the earth lug must be welded 20cm away from the ground(clearly visible). It will be connected to the lightening grounding device.

5. Please refer to the national standard, or the European standard, or American standard or  figure 1 in this manual to arrange grounding device.
6. Tower and its accessories can be provided individually according to your requirements